The dual-bay SC2 Superb Battery Charger from Nitecore is a versatile charger for most rechargeable battery chemistries including lithium manganese oxide (IMR), lithium-ion and lithium iron phosphate (LiFePO4). An intelligent power management system automatically detects the number of batteries installed, evenly distributes charging power, and selects the appropriate charging current based on the specific needs of each battery installed. Besides charging batteries, this charger also provides output power from a standard USB port to charge small electronics such as smartphones. LEDs clearly display the charging status and power level of each battery, and output selection. Reverse polarity and over-charge protection, as well as short circuit and non-rechargeable battery detection, prevents damage to the batteries and charger.
Features:
Charging
Manual or automatic charging options
Charging programme optimised for IMR batteries
Two independent charging bays
Separate spring-loaded sliders accept different battery sizes and ensures a secure connection
USB port for charging devices
If no battery is in bay #2 USB will charge
With battery in bay #2 battery charging will be prioritised, then switch to USB charging when battery is full
5 VDC output at 2100mA max
Up to 3A charging speed in a single slot
Automatic current selection based on battery capacity
Automatically detects battery power status and displays charging progress
IMR lithium-ion battery activation: Activates fully depleted lithium-ion batteries with protective circuit
IMR battery recovery
Safety Features
Automatic detection of non-rechargeable lithium batteries
Automatically stops charging upon charging completion to prevent battery overcharging
Reverse polarity protection prevents damage to battery if installed incorrectly
Short circuit prevention
Overtime charging protection: Stops charging after 10 hours to prevent damage to battery due to excessive heat
Certified by RoHS, COE, FCC and CEC
Made from fire retardant and flame resistant polycarbonate
Engineered with heat-dissipating fins to help maintain low charger temperature
Battery Compatibility
Li-ion, IMR, LiFePO4:
10340, 10350, 10440, 10500
12340, 12500, 12650
13450, 13500, 13650
14350, 14430, 14500, 14650
16500, 16340 (RCR123), 16650
17350, 17500, 17650, 17670
18350, 18490, 18500, 18650, 18700
20700, 21700, 22500, 22650, 25500, 26500, 26650
Ni-MH, NiCd:
AA, AAA, AAAA
C-cell
D-cell
Specifications
Capacity 2
Input Voltage 100 - 240 VAC, 50/60 Hz, 0.9 A (max), 30 W
12 VDC, 2.5 A
Output Voltage Battery: 4.35 VDC, 4.2 VDC, 3.7 VDC, 1.48 VDC
USB: 5 V, 2100 mA
Output Current 3 A + 2 A (max)
Certifications RoHS, COE, FCC, CEC
Dimensions 6.1 x 3.2 x 1.7" / 15.5 x 8.0 x 4.4 cm
Weight 9.3 oz / 263.0 g without batteries and power cord
